Although ZFSBootMenu images can be booted on legacy BIOS systems or (on other platforms) alternative firmware, ZFSBootMenu integrates nicely with modern UEFI systems. ZFSBootMenu builds a custom initramfs image around a standard Linux kernel. Most distributions compile the Linux kernel with an EFI stub loader; the ZFSBootMenu kernel and initramfs pair can therefore be booted directly by most UEFI implementations or by EFI boot managers like rEFInd or gummiboot (systemd-boot).
When generating ZFSBootMenu images from a local host, it is possible to edit
/etc/zfsbootmenu/config.yaml to copy
the ZFSBootMenu kernel and initramfs directly to your EFI system partition. Suppose that the directory listing for your
/boot looks like:
# ls /boot
Typically, EFI system partitions (ESP) are mounted at
/boot/efi, as is shown above. An ESP may contain a number of
sub-directories, including an
EFI directory that often contains multiple independent EFI executables. In this
/boot/efi/EFI/zbm may hold ZFSBootMenu kernels and initramfs images. After setting the
property of the
Components section of
generate-zbm will cause ZFSBootMenu kernel and initramfs pairs to be installed in the desired location:
# lsblk -f /dev/sda
NAME FSTYPE LABEL UUID FSAVAIL FSUSE% MOUNTPOINT
├─sda1 vfat AFC2-35EE 7.9G 1% /boot/efi
└─sda2 swap 412401b6-4aec-4452-a6bd-6fc20fbdc2a5 [SWAP]
# ls /boot/efi/EFI/zbm/
After the kernel and initramfs pairs are made available on the ESP, you'll need a way to boot them on your system. This can be done directly via efibootmgr or via a third-party boot manager like rEFInd.
efibootmgr --disk /dev/sda \
--part 1 \
--label "ZFSBootMenu" \
--loader '\EFI\zbm\vmlinuz-1.12.0_2' \
--unicode 'zbm.prefer=zroot ro initrd=\EFI\zbm\initramfs-1.12.0_2.img quiet' \
Take note to adjust the arguments to
--part, the path to the kernel in
--loader, and the
initramfs path (
initrd=) and pool preference (
zbm.prefer=) to match your system configuration.
Each time ZFSBootMenu is updated, a new EFI entry will need to be manually added, unless you disable versioning in the ZFSBootMenu configuration.
rEFInd is considerably easier to install and manage. Refer to your distribution's packages for installation. Once
rEFInd has been installed, you can create
refind_linux.conf in the directory holding the ZFSBootMenu files
/boot/efi/EFI/zbm in our example):
"Boot default" "zbm.prefer=zroot ro quiet loglevel=0 zbm.skip"
"Boot to menu" "zbm.prefer=zroot ro quiet loglevel=0 zbm.show"
As with the efibootmgr section, the
zbm.prefer= option needs to be configured to match your environment.
This file will configure
rEFInd to create two entries for each kernel and initramfs pair it finds. The first will
directly boot into the environment set via the
bootfs pool property. The second will force ZFSBootMenu to display
its interactive user interface and allow you to boot alternate environments, kernels and snapshots.
Avoiding an Intermediate Boot Manager#
On most UEFI systems, booting ZFSBootMenu without the use of an intermediate boot manager like rEFInd is possible. Linux kernels typically include an EFI stub and can be invoked as UEFI executables directly by the firmware. Unfortunately, while some UEFI implementations allow passing of command-line arguments to the UEFI kernel, others (from Dell, for example) seem to ignore all configured command-line arguments, making it impossible to specify needed options (such as the path to the ZFSBootMenu initramfs). Even those implementations that do respect configured arguments may provide no firmware interface to alter these arguments, which means booting a backup ZFSBootMenu image may not be possible if it wasn't configured in advance from a Linux installation.
These limitations are easily avoided if ZFSBootMenu is packaged as a bundled UEFI executable that encapsulates the
Linux kernel, ZFSBootMenu initramfs and all needed command-line arguments. Dracut facilitates the creation of a bundled
UEFI executable, and the
generate-zbm script exposes this capability.
Creation of a Bundled UEFI Executable#
EFI section of the ZFSBootMenu config.yaml
governs the creation of bundled UEFI executables. The default configuration disables this option; to enable it, set
The remaining keys in the
EFI section allow control over where and how UEFI bundles are created:
ImageDiris the location where the bundle will be written, and should generally be a subdirectory of the
EFIsubdirectory of your EFI system partition. The default,
/boot/efi/EFI/void, is fine if the ESP is mounted at
/boot/efi(and you are either running Void Linux or don't care if the directory name matches your distribution name).
Versionscontrols whether UEFI bundles include a version and revision number in their name and, if so, how many prior versioned executables are retained. Because the firmware is not automatically reconfigured to boot the latest version after runs of
generate-zbm, it is probably best to disabling
Versionsby setting its value to
0. See the description of this key in manual page for more details about its behavior. Even when versioning is disabled,
generate-zbmstill makes a backup of your existing boot image by replacing its
-backup.EFIto provide a fallback.
Stubspecifies the location of the UEFI stub loader required when creating a bundled executable. Both
gummibootand its descendant
systemd-bootprovide stub loaders;
gummiboot, for example, tends to store the loader at
/usr/lib/gummiboot/linuxx64.efi.stub. If this key is omitted (as it is by default),
dracutwill attempt to find either the
gummibootversion at their expected locations. This key is useful when automatic detection fails.
In addition, two options in the
Kernel section of the configuration file are used during bundle creation:
Prefixprovides the base name for the output bundle file. If this is omitted, the base name will be derived from the name of the kernel used to create the image; for example, the kernel
/boot/vmlinuz-<version>will produce a bundle called
vmlinuz.EFIin the configured
ImageDir, while the kernel
/boot/vmlinuz-lts-<version>will produce a bundle called
CommandLineprovides the command-line arguments that will be encoded in the bundle and passed to the kernel during boot. The
kernel_cmdlinealso provides a mechanism for encoding the kernel command-line; if the ZFSBootMenu configuration specifies
dracutconfiguration for ZFSBootMenu specifies
kernel_cmdline, the two values will be concatenated.
After adjusting the configuration options as desired, run
generate-zbm and a bundled UEFI executable will be created
Booting the Bundled Executable#
The efibootmgr utility provides a means to configure your firmware to boot the bundled executable. For example:
efibootmgr -c -d /dev/sda -p 1 -L "ZFSBootMenu" -l '\EFI\VOID\VMLINUZ.EFI'
will create a new entry that will boot the executable written to
/boot/efi/EFI/void/vmlinuz.EFI if your EFI system
/dev/sda1 and is mounted at
/boot/efi. (Remember that the EFI system partition should be a FAT
volume, so the path separators are backslashes and paths should be case-insensitive.) For good measure, create an
alternative entry that points at the backup image:
efibootmgr -c -d /dev/sda -p 1 -L "ZFSBootMenu (Backup)" -l '\EFI\VOID\VMLINUZ-BACKUP.EFI'
The firmware should provide some means to select between these alternatives.
It is also generally possible to configure the boot sequence from your firmware setup interface. Simply find and select the path to the bundled EFI executable from this interface.